Used Medical Equipment

Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615

Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615
Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615
Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615
Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615
Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615

Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615

Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615. Fluke ESA615 Electrical Safety Analyzer. The ESA615 Electrical Safety Analyzer brings fast and simple automated testing to a portable analyzer for healthcare technology management professionals that perform electrical safety testing on medical equipment both in the field and in facilities. Whether it is simple testing or comprehensive analysis, the ESA615 can do it all. This multifaceted device performs all primary electrical safety tests, including line (mains) voltage, ground wire (protective earth) resistance, insulation resistance, device current, and lead (patient) leakage tests.

It also offers ECG simulation and pointto-point voltage, leakage, and resistance tests. Versatile to global electrical safety standards of choice, ESA615 tests to ANSI/AAMI ES1, NFPA- 99, IEC62353 (VDE751) IEC60601-1 (2nd and 3rd editions) and AS/NZS 3551. The ESA615 is an all-in-one solution with a multimeter, safety analyzer and ECG simulator in a single test instrument. Pre-set templates allow you to test to the global standard of your choices at the push of a button.

Let the unit guide you through the test steps quickly and accurately in three simple steps. Select the test sequence corresponding to your standard of choice.

Initiate the automated test sequence. Store the results on-board or wirelessly export to your PC in seconds.

The automated test sequences are easily customized to suit individual testing requirements. The ESA615 is a small, lightweight analyzer with an integrated handle to carry from place to place for on-the-go field service.

It is designed for operation in tight spaces, and is easy to fit on any cart. A light, protective carrying case makes it easy to store and transport. A push-button interface allows quick access to highly-comprehensive functions and features, and an intuitive interface guides the user through tests.

The ESA615 features a large display for clear indication of available functions, set-up criteria, device under test receptacle conditions, and test results. Data can be entered quickly with a plugand-play keyboard, barcode scanner and/ or on-board data entry interface. Data archival is fast and simple with wireless communication or through a removable memory card with capacity for thousands of test results. On-board automation with automated test sequences for rapid testing and easy compliance to key global electrical safety standards ANSI/AAMI ES1 (NFPA-99), IEC62353 (VDE751), IEC60601-1 2nd and 3rd editions, and AS/NZS 3551. Portable, ergonomic design with an integrated handle and tilt stand.

Human-factors-designed user interface for streamlined testing. ECG waveform tests and dual-lead measurements combine the functionality of a simulator, multimeter and safety analyzer in a single test tool. 20 A at 120 V current capability. Five applied parts jacks and easy ECG snap connection; optional expander box for up to 12-lead ECG testing.

Easy data entry through barcode scanner, external keyboard or on-board keypad. Replaceable mains fuses keep your unit in the field and out of the repair shop.

Custom language selections include English, French, German, Spanish, Italian and Portuguese. Large, easy-to-read display with adjustable contrast. Rigorously tested for rugged field applications, with CE and CSA in addition to Fluke qualityruggedness for long-term reliability. 90 V ac rms to 132 V ac rms. 0 V ac rms to 300 V ac rms.

± (2 % of reading + 0.2 V). Mains and point to point. > 200 mA ac / 0 to 2 / ± (2 % of reading + 0.015). Earth resistance and point to point.

0 A to 20 A ± 5 % of reading + (2 counts or 0.2 A, whichever is greater). 15 A to 20 A, 5 min. Off 10 A to 15 A, 7 min. Off 0 A to 10 A continuous. Modes (Modes are available in all leakage tests with the exception of MAP leakages that are available only in true-rms). AC + DC (True rms) AC only DC only. Patient load selection (input impedance). 0 µA to 199.9 A 200 µA to 1999 A 2 mA to 10 mA. DC to 1 kHz / ± 1 % of reading + (1 A or 1 LSB, whichever is greater) 1 kHz to 100 kHz / ± 2 % of reading + (1 A or 1 LSB, whichever is greater) 1 kHz to 5 kHz (current > 1.6 mA) / ± 4 % of reading + (1 µA or 1 LSD, whichever is greater) 100 kHz to 1 MHz / ± 5 % of reading + (1 A or 1 LSB, whichever is greater).

Accuracy for Isolation, MAP, Direct AP, Alternative AP, and Alternative Equipment leakage tests all ranges are. At 120 V ac + (2.5 µA or 1 LSD, whichever is greater) For Alternative equipment, Alternative AP, and Direct AP leakage tests, the leakage values are compensated for nominal mains as per 62353. Therefore, the accuracy specified for other leakages is not applicable. Ground wire (earth) Chassis (enclosure) Lead to ground (patient) Lead to lead (patient auxiliary) Lead isolation (mains on applied part) Direct equipment Direct applied part Alternative equipment Alternative applied part Point to point.

Mains on applied part test voltage. 100 % ± 7 % of Mains for AAMI, current limited to 1 mA ± 25 % per AAMI 100 % ± 7 % of Mains for IEC 62353 current limited to 3.5 mA ± 25 % per IEC 62353 100 % ± 7 % of Mains for IEC 60601-1 current limited to 7.5 mA ± 25 % per IEC 60601-1. 75 µ A to 199 µA 200 µA to 1999 µA 2 mA to 20 mA. ± 10 % of reading + (2 counts or 20 µA, whichever is greater).

0.5 M to 20 M / ± (2 % of reading + 0.2 M) 20 M to 100 M / ± (7.5 % of reading + 0.2 M). 500 V dc or 250 V dc (+ 20 %, -0 %) 2.0 ± 0.25 mA short-circuit current. Mains-PE, AP-PE, Mains-PE, Mains-NE (non-earthed accessible conductive part) and AP-NE (non-earthed accessible conductive part). ECG complex: 30 BPM, 60 BPM, 120 BPM, 180 BPM, and 240 BPM. Square wave (50 % duty cycle): 0.125 Hz and 2 Hz Sine wave: 10 Hz, 40 Hz, 50 Hz, 60 Hz, and 100 Hz Triangle wave: 2 Hz Pulse (63 ms pulse width): 30 BPM and 60 BPM.

ANSI/AAMI ES-1, IEC62353, IEC60601-1, and AS/NZS 3551. Patient Monitor, Defibrillator, Infusion Pump, Ultrasound Device, Generic Device and System. Patient Monitor, Defibrillator, Infusion Pump, Ultrasound Device and Generic Device.

Mini-B connector for control by a computer. Type A, 5 V output, 0.5 A max load. Connector for keyboard and barcode reader. IEEE 802.15.4 for control by a computer.

120 V ac 230 V ac. Mains voltage inlet power range. 90 V ac rms to 132 V ac rms 180 V ac rms to 264 V ac rms. 47 to 63 Hz 47 to 63 Hz.

10 ºC to 40 ºC (50 ºF to 104 ºF). 20 ºC to 60 ºC (-4 ºF to 140 ºF). 10 % to 90 % non-condensing.

120 V ac mains supply voltage up to 5000 meters 230 V ac mains supply voltage up to 2000 meters. ONLY item(s) included as shown in listing picture(s). Ensuring this supervision is the purchasers' responsibility. By purchasing this item, you acknowledge/declare that you are authorized and properly trained to use this medical device, and or are licensed to resale the item. Let us know and we will be happy to accommodate.

We recommend DHL or UPS Worldwide parcel. DHL is faster and more reliable. Need to return and item? Have a question about an item? WE ARE A SMALL FAMILY RUN BUSINESS IN THE MOUNTAINS OF NORTH CAROLINA.

WE APPRECIATE YOUR BUSINESS AND STRIVE TO PROVIDE A QUALITY PRODUCT AT A FAIR PRICE. The item "Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615" is in sale since Monday, May 10, 2021. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Other Test, Measurement & Inspection". The seller is "jamradcorp" and is located in Waynesville, North Carolina. This item can be shipped to United States.

  • Type: Electrical Safety Analyzer
  • MPN: ESA615
  • Brand: Fluke


Fluke ESA615 115V ac Electrical Safety Analyzer Medical Equipment Tester ESA-615